Product center

Lorem Ipsum is simply dummy text

  • Electric rear door system

    Electric rear door system

    Expand the luggage storage space through the driving unit of the main shaft (one shaft) and automatically open and close the rear trunk door through remote operation. When it detects that the door is closed and foreign matters are pinched in, it can also realize manual opening and closing, full opening setting and stopping in the way

  • Intelligent handle system

    Intelligent handle system

    The intelligent lock system with both high-end feeling and high function locks the handle outside the car door with electrostatic capacity touch sensor. It does not need to press the lock button as before. As long as the lock sensor is "touched" lightly, the door can be locked without the lock button. The handle is simple and generous in the shape of the handle outside the car, and the transmission antenna, lock sensor / unlock sensor and sensor detection circuit are built in the handle outside the car door, which improves the performance of in car Vehicle carrying capacity and reduced cost

  • Electric sliding door system

    Electric sliding door system

    The sliding door has a built-in driving device, which can expand the room space through remote control operation. The sliding door is equipped with a driving device to automatically open and close the sliding door without occupying the room space. If the door is closed, it will automatically open if it is detected to be clamped

  • Electric sliding door system

    Electric sliding door system

    The sliding door has a built-in driving device, which can expand the room space through remote control operation. The sliding door is equipped with a driving device to automatically open and close the sliding door without occupying the room space. If the door is closed, it will automatically open if it is detected to be clamped

  • Intelligent handle system

    Intelligent handle system

    The intelligent lock system with both high-end feeling and high function locks the handle outside the car door with electrostatic capacity touch sensor. It does not need to press the lock button as before. As long as the lock sensor is "touched" lightly, the door can be locked without the lock button. The handle is simple and generous in the shape of the handle outside the car, and the transmission antenna, lock sensor / unlock sensor and sensor detection circuit are built in the handle outside the car door, which improves the performance of in car Vehicle carrying capacity and reduced cost

  • Aluminum door frame

    Aluminum door frame

    Using aluminum material, compared with the previous products, it can reduce about 30% and realize lightweight. The door frame for the side door connecting the roll forming part and the stamping forming part by laser welding. It is a global product for domestic and overseas customers.

  • Sunroof system

    Sunroof system

    Open and close the glass sunroof to provide a sense of openness for passengers and drivers.The panoramic skylight composed of front and rear glass can feel fresh wind and warm sunshine from all seats

  • Sunroof system

    Sunroof system

    Open and close the glass sunroof to provide a sense of openness for passengers and drivers. The panoramic skylight composed of front and rear glass can feel fresh wind and warm sunshine from all seats and even the back seat. The anti pinch function ensures the safety when the user opens and closes the door.

  • Door frame moulding (zinc die casting)

    Door frame moulding (zinc die casting)

    Zinc die casting, with high degree of freedom, combined with special electroplating, highlights the advanced texture and high design performance, which is a high-level door crash strip specially designed for high-end models

  • Door frame moulding (stainless steel products)

    Door frame moulding (stainless steel products)

    It can also add decoration such as SUS, resin, black brilliant car wax, etc., with a wide range of products, which can be applied from low-end models to high-end models

  • Rear spoiler

    Rear spoiler

    Effectively use the shape freedom of blow molding and injection molding to improve the design and aerodynamic performance

  • Door frame moulding (stainless steel products)

    Door frame moulding (stainless steel products)

    It can also add decoration such as SUS, resin, black brilliant car wax, etc., with a wide range of products, which can be applied from low-end models to high-end models

  • Bumper reinforcement system

    Bumper reinforcement system

    The use of super hard aluminum extrusion alloy, not only light weight, but also can absorb the impact energy of vehicle collision, reduce the impact of vehicles and passengers

  • Grid system

    Grid system

    In the louver installed in front of the radiator, the air flow into the grille is controlled by the opening and closing action of the fan, so as to improve the aerodynamic performance and thermal efficiency of the vehicle

  • Door frame moulding (zinc die casting)

    Door frame moulding (zinc die casting)

    Zinc die casting, with high degree of freedom, combined with special electroplating, highlights the advanced texture and high design performance, which is a high-level door crash strip specially designed for high-end models

  • Door frame moulding (stainless steel products)

    Door frame moulding (stainless steel products)

    It can also add decoration such as SUS, resin, black brilliant car wax, etc., with a wide range of products, which can be applied from low-end models to high-end models

  • Center pillar decoration

    Center pillar decoration

    Adopt injection molding resin, rich in painting and color, high in design

  • Crash box system

    Crash box system

    In case of vehicle collision, the self damage can absorb the impact energy and reduce the impact on the vehicle and passengers

  • Weight detection sensor

    Weight detection sensor

    The weight can be measured correctly no matter how the driver's sitting posture is, and the action of air bag to all the passenger of the copilot can be controlled reasonably

  • Pneumatic seat system

    Pneumatic seat system

    Provide comfortable sitting feeling through inflation technology realize the movement of up to 28 directions in the world through light weight unit air bag shape and air pump output to realize the massager\'s sense of finger pressure

  • Rear seat comfort

    Rear seat comfort

    Provide comfortable and spacious rear seat space with adjustable backrest inclination: through the combination of sliding mechanism linkage and individual action, the footrest with large inclination angle is realized: although it is very large after being pulled apart, it can be folded up very small, the middle of the backrest is concave (only the upper body is sitting up): the sitting posture is comfortable and comfortable, and it can only be lifted up above the shoulder blades

  • Powerfold seat system

    Powerfold seat system

    With the switch operation, the electric retraction of the seat is put under the floor, without the tedious collection work, the smooth collection action and the high efficiency of the driving part, and the small motor is used to realize the energy-saving start of the seat lock mechanism when the seat is used to fully ensure the rigidity of the seat and the collision safety of the passengers

  • Powerfold seat system

    Powerfold seat system

    Operate the switch to put the electric seat under the floor, without complicated collection workSmooth collectionHigh efficiency of the driving part, using small motor to realize power saving startThe

  • Rear seat comfort

    Rear seat comfort

    Provide comfortable and spacious rear seat space with adjustable backrest inclination: through the combination of sliding mechanism linkage and individual action, the footrest with large inclination angle is realized: although it is very large after being pulled apart, it can be folded up very small, the middle of the backrest is concave (only the upper body is sitting up): the sitting posture is comfortable and comfortable, and it can only be lifted up above the shoulder blades

  • Intelligent handle system

    Intelligent handle system

    The intelligent lock system with both high-end feeling and high function locks the handle outside the car door with electrostatic capacity touch sensor. It does not need to press the lock button as before. As long as the lock sensor is \"touched\" lightly, the door can be locked without the lock button. The handle is simple and generous in the shape of the handle outside the car, and the transmission antenna, lock sensor / unlock sensor and sensor detection circuit are built in the handle outside the car door, which improves the performance of in car Vehicle carrying capacity and reduced cost

  • Sunroof system

    Sunroof system

    Open and close the glass sunroof to provide a sense of openness for passengers and drivers. The panoramic skylight composed of front and rear glass can feel fresh wind and warm sunshine from all seats and even the back seat. The anti pinch function ensures the safety when the user opens and closes the door.

  • Door frame moulding (stainless steel products)

    Door frame moulding (stainless steel products)

    It can also add decoration such as SUS, resin, black brilliant car wax, etc., with a wide range of products, which can be applied from low-end models to high-end models

  • Door frame moulding (stainless steel products)

    Door frame moulding (stainless steel products)

    It can also add decoration such as SUS, resin, black brilliant car wax, etc., with a wide range of products, which can be applied from low-end models to high-end models

  • Door frame moulding (zinc die casting)

    Door frame moulding (zinc die casting)

    Zinc die casting, with high degree of freedom, combined with special electroplating, highlights the advanced texture and high design performance, which is a high-level door crash strip specially designed for high-end models

  • Crash box system

    Crash box system

    In case of vehicle collision, the self damage can absorb the impact energy and reduce the impact on the vehicle and passengers

About us

Create value for partners!

Since its release in 2009, mituo enterprise station building system (formerly MetInfo | mituo enterprise station building system) has become the mainstream tool for many small and medium-sized enterprises to build stations. System USES PHP + Mysql architecture, total station with built-in SEO search engine optimization mechanism, support custom user interface language, has a corporate web site commonly used module function module, news module (enterprise profile, product module, download module, image module, recruiting module, online message, feedback systems, online communication, links, members and permissions management). Powerful and flexible background management function, visual editing function, pseudo-static and static page generation function, personalized module add function, different column custom Banner image function can create a beautiful atmosphere and marketing force for the enterprise boutique website.


Total station with built-in SEO search engine optimization mechanism, support custom user interface language, has a corporate web site commonly used module function module, news module (enterprise profile, product module, download module, image module, recruiting module, online message, feedback systems, online communication, links, members and permissions management).


  • 2008-10-13
    registered metinfo.cn metinfo.com.cn
  • 2009-3-28
    Metinfo1.0 release
  • 2009-6-24
    Mitou was founded
  • 2009-11-4
    metcms Full domain registration
  • 2018-1-29
    Metinfo6.0 Go online to realize visualization and template m
  • 2018-9-26
    Copyright modified to "mituo enterprise station construction
  • 2018-12-31
    500 Set of visual response to the launch of the site templat
  • 2019-11-28
    Metinfo7.0 The system was officially put into operation.

       Based on the cooperation with the research institute, the local finishing research sub-institute, which is responsible for the design of the original model and the actual vehicle test, focuses on the development of local exclusive specifications and the improvement of performance. The location is close to the core customer enterprises such as automobile and auto parts, so it can give feedback quickly. Through the local design of steering, braking, headlight, IVI, module, etc., to develop exclusive products in the Chinese market, to meet the order demand of Chinese vehicle enterprises.


News and information

Always pay attention to the industry trends

The intelligent application

Intelligent application

Home
Product
News
Contact
亲近乱子伦免费视频中文字幕